Henge 933 12gr Servo Metal Digital

1.Use metal gears, especially use steel material in output gear, which has better intensity , abrasion resistance and accuracy, makes sure servo’s output deviation very small after long time running.

2. Use high quality motors as FUTABA's, makes sure the servo's life longer, and tests prove it can continually run in high speed for 50 hours.

3.Use Japanese raw material to produce outer shell, which is more sturdy and durable and can bear 120℃ temperature.

4. Rapid response control, better acceleration.

5. Very nice consistency, center error less than ±0.5 degree, angle ±40 degree, biggest ±60 degree, error less than ±0.5 degree.

6. Have overload current protection function, even if the output gear is blocked, motor and electronics component will not be damaged.

7.Suitable to be used in 450 dynamoelectric helicopters to control the inclined dishes and in fixed wing airplanes

SPECIFICATION：

Operating voltage range： 4.5V—6.0V

Operating temperature range： -20℃ to +60℃

Operating speed： 0.10 sec/60℃ 6V 0.12 sec/60 ℃ 4.8V

Torque： 2.0kg.cm 6V 1.8kg.cm 4.8V

Idle current: 5mA at stopped

Running current range： 50-150mA

Block up to turn electric current: 600mA

Dead band width： ≤4usec

Angle deviation： center :<±0.5 degree;

angle ±40 degree, error :<±0.5 degree

Size： 22.5×11.5×24.6mm

Weight： 12g Bearing material

Metal Gear material： 4 metal gears and 1 nylon gear

Connector wire length： 21cm