RP82L Receptor Sintetizado FM/PPM 8canales

RC82L Receiver Features

1. 1.5Km effective remote control distance;

2. Light weight and small dimension, RC82L is suitable for any small electric plane, 3D plane, glider or training plane. With small size, you can install it at any position.

3. Change the crystal and pins at the side face, more convenient for you;

4. Excellent IP3 performance, when flying, you won’t be bothered by adjacent channel’s interference. 5. 8 channels servo output, detect positive or negative modulation automatically. Be compatible with most of the popular transmitters, such as Futaba, JR, Hitec, GWS and so on;

6. Use HC-50U dual conversion receiver crystal.

7. Use dual conversion receiving technology, RC82L can eliminate mirror frequency interference effectively.

Installation Step

1. Plug the crystal into the receiver (both front and back sides are ok)

2. According to the servos’ polarity, connect all the servos and ESC (refer to the channel number and polarity signed on the receiver’s cover). Note: If the plug’s polarity is wrong, the receiver, servo and ESC may be damaged.

3. Connect the battery switch to any free channel. If the plugs are all been used, please use Y type harness.

4. Please put the receiver in the foam rubber to avoid vibration.

5. Please spread the antenna and do not coil or cut it.

Distance Checking Fully collect the transmitter’s antenna and stretch the receiver’s.

Keep moving the stick and observe receiving condition.

If there is a correct signal within 90m (270 feet), it passed the distance checking.

Specifications

*Dimension 45*22*8.3mm

*Weight 7.7g(without shrink wrap)

*Sensitivity ≤ 2.0μV

*Channel Number 1-8

*Filter Dual Turned RF Circuit, Dual Conversion

*Digital Filter Single chip decode DSP filter algorithm

*Modulation FM/PPM (pulse position modulation)

*Polarity Positive or Negative (automatic detect)

*Package Cover ShrinkWrap

*Working Voltage 4.0V~6.0VDC

*Working Current 11mA