UBEC 4A

1．Specifications：

1.1 Output：5V/4A or 6V/4A (Changeable with an jumper)

1.2 Input：7-25.5V (2 to 6 cells Lipo battery pack, 6 to 16 cells NIMH battery pack)

1.3 Continuous output current：4A

1.4 Burst output current：6A (≤15 Sec) 1.5 Ripple：＜45mVp-p(@2A/12V)

1.6 Size：35mm*20mm*5.8mm (L*W*H)

1.7 Weight：14g(Including the cable and the ferrite ring)

2． Features：

2.1 Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of the chip is up to 93% ；

2.2 The small size and the light weight make it very convenient to use；

2.3 The output current is very large, the continuous output current is up to 4A, and the burst output current is 6A.；

2.4 A shield covers almost all the electronic components on PCB, and a special made filter(ferrite ring) is attached with the output wires to significantly reduce the electromagnetic interference；

2.5 With ultra-wide input voltage from 7V—25.5V；

2.6 Safe power on with the polarity protection function. If the input polarity is not correct ,the UBEC can’t work, but it will not be damaged. What you need to do is just swapping the battery pack’s polarity ；

2.7 Shows the working status with an indicator(LED), lights when the output is in normal range；